How to calculate landed cost after tariffs (with calculator)

Free assessment

See if PILTA can help. A free 15-minute call with the PILTA Founder and CEO Ryan or one of our expert executives and strategists.

To calculate landed cost, add the product cost, international freight and insurance, duties and tariffs, customs fees, broker charges and the cost of moving goods from the port to the warehouse, then divide by the units received. The result is landed cost per unit, the figure to use for cost of goods sold and for pricing.

Tariffs make that figure harder to keep current. U.S. duty rules changed more than once in 2026, so a cost sheet built last year may carry the wrong rates. This guide uses the rates in effect on November 16, 2026, and the free landed cost calculator runs the same math for any order.

Quick definitions

Landed cost: The total cost to get a product from the supplier to the warehouse, ready to sell, including the product, freight, duties, fees and inbound handling.

FOB (free on board): A trade term in which the seller’s price covers the goods loaded on the ship at the export port; the buyer pays the ocean freight and insurance from there.

HTS (Harmonized Tariff Schedule of the United States): The list of product codes and duty rates published by the U.S. International Trade Commission (USITC); every import is classified under a 10-digit HTS number.

CBP (U.S. Customs and Border Protection): The federal agency that collects duties and fees when goods enter the United States.

MPF (merchandise processing fee): A CBP fee on formal entries, charged as a percentage of the goods’ value with a set minimum and maximum.

HMF (harbor maintenance fee): A CBP fee on cargo unloaded from a commercial vessel at a U.S. port.

Section 301 duty: An added tariff imposed under the Trade Act of 1974 and collected by CBP on top of the regular duty rate.

The formula for landed cost

The formula for landed cost is a sum divided by a count:

Landed cost per unit = (product cost + freight and insurance + duties and tariffs + customs fees + broker and bond fees + inbound handling) ÷ units received

Product cost is what the supplier invoices. Freight and insurance cover the trip from the factory to the U.S. port. Duties and tariffs depend on the HTS code, the country of origin and the customs value. Customs fees are charged by CBP on each entry. Inbound handling covers port and terminal charges, drayage (the short truck move from the port), the truck to the warehouse and receiving.

Divide by the units received. Short shipments and damaged cartons spread the same costs over fewer sellable units.

What landed cost includes, line by line

Landed cost ends at the warehouse door. Shipping to customers, Amazon fulfillment fees and returns are fulfillment and selling costs, and they belong on separate lines. The table shows the usual landed cost lines and where each number comes from.

Cost lineWhat it coversSource of the number
Product costUnit price, plus packing and any molds or tooling the buyer pays forPurchase order and supplier invoice
International freightOcean or air freight from the export port, plus origin charges when the trade terms put them on the buyerFreight forwarder quote or invoice
Cargo insuranceCover for loss or damage in transitForwarder or insurer
Duties and tariffsThe general HTS rate plus any added duties, such as Section 301 duties or the Section 232 duties on steel, aluminum and copper articlesHTS code, country of origin and customs value
Customs feesThe merchandise processing fee and, on ocean freight, the harbor maintenance feeCBP entry summary from the broker
Broker and bondThe customs broker’s entry fee and the customs bondBroker invoice
Inbound handlingPort and terminal fees, drayage, the truck to the warehouse and 3PL (third-party logistics provider) receivingCarrier and 3PL invoices
OtherInspection, lab testing, relabeling and FX (foreign exchange) costs on supplier paymentsInvoices and bank statements

Two costs are easy to miss. Paying a supplier in another currency adds exchange spread and wire fees. Cash tied up in goods on the water also has a cost, and some importers add a carrying charge for it.

How to calculate landed cost in six steps

  1. Get the product cost on clear terms. Ask every supplier to quote under the same Incoterms rule, the trade terms that set who pays for each leg of the trip, such as FOB at the export port.
  2. Confirm the HTS code and origin. Look up the 10-digit code in the USITC’s Harmonized Tariff Schedule and note the general rate. Then check Chapter 99, the part of the schedule that holds added tariffs, for any duty on that country of origin. A licensed customs broker should confirm both.
  3. Find the customs value. U.S. duty is figured on the transaction value: the price paid for the goods, plus required additions not already in that price, such as buyer-paid packing, materials or tooling the buyer supplies, selling commissions and royalties. CBP’s guidance on customs value excludes international freight and insurance from it.
  4. Add duties and fees. Multiply the customs value by each duty rate. Add the merchandise processing fee and, for ocean freight, the harbor maintenance fee.
  5. Add freight and inbound costs. Include the forwarder invoice, insurance, broker and bond fees, port charges, drayage and warehouse receiving.
  6. Divide by units received. Record the result by purchase order so it flows into cost of goods sold.

The landed cost calculator follows these six steps for one order. The Excel workbook linked at the end of this guide does the same for many SKUs (stock keeping units) at once.

A worked example with 2026 duties and fees

The example is one ocean shipment of 5,000 units, a product of Vietnam. The product cost, freight and service charges are illustrative, and the 4 percent general duty rate is an example. The other rates are the published rates as of November 16, 2026.

LineHow it is figuredAmount
Product cost (FOB)5,000 units × $8.00$40,000.00
Ocean freight and insuranceForwarder quote$3,200.00
General duty (example rate)4% × $40,000$1,600.00
Section 301 duty, product of Vietnam12.5% × $40,000$5,000.00
Merchandise processing fee0.3464% × $40,000$138.56
Harbor maintenance fee0.125% × $40,000$50.00
Customs broker and bondBroker invoice$300.00
Port fees, drayage and inland freightCarrier invoices$1,500.00
3PL receiving3PL rate card$350.00
Total landed costSum of the lines above$52,138.56
Landed cost per unit$52,138.56 ÷ 5,000$10.43

The merchandise processing fee is 0.3464 percent of value, with a minimum of $34.58 and a maximum of $670.86 per formal entry for fiscal year 2027, which began October 1, 2026. The harbor maintenance fee is 0.125 percent of value on cargo unloaded from a vessel. Since July 24, 2026, non-exempt products of Vietnam carry an added 12.5 percent Section 301 duty, according to CBP.

Landed cost here is $10.43 per unit against an $8.00 factory price, about 30 percent more. Duty was figured on the $40,000 customs value. Figuring it on the $43,200 total of goods, freight and insurance would overstate duty by $528.

Splitting costs across multiple items

When a container carries several SKUs, duty is figured line by line on the customs entry, so each SKU gets its own duty from its own HTS code and value. Shared costs need an allocation rule:

  • By volume for ocean freight, drayage and receiving, since ocean space is sold by the container or the cubic meter.
  • By weight for air freight, which is priced on chargeable weight.
  • By value for insurance and the percentage-based customs fees.
  • By units only when the items are close in size and value.

Pick one rule per cost line and keep it from order to order, so changes in margin reflect real changes in cost.

Tariff impact on small business margins

Three tariff changes in 2026 affect small importers:

  • IEEPA duties ended. CBP stopped collecting the duties imposed under the International Emergency Economic Powers Act (IEEPA) on goods entered on or after February 24, 2026. Section 232 and Section 301 duties stayed in place.
  • A new Section 301 layer. Since July 24, 2026, CBP has collected added duties of 10 to 12.5 percent on goods from 60 economies, including 12.5 percent on products of China and Vietnam. Section 232 goods, such as steel, aluminum and copper articles, are exempt, as are goods of Canada and Mexico that enter duty-free under USMCA (the United States-Mexico-Canada Agreement).
  • De minimis stays suspended. Under a CBP rule effective June 24, 2026, the de minimis exemption is suspended indefinitely for shipments valued at $800 or less that arrive by any route other than international mail. Those shipments go through formal or informal entry.

Small importers feel these changes in two ways. The merchandise processing fee has a minimum of $34.58 per formal entry, so a small order carries more fee per unit. Tariff increases also land on the importer: the USITC found that U.S. importers bore nearly the full cost of the 2018 to 2021 Section 232 and 301 tariffs, with import prices rising about 1 percent for each 1 percent of tariff.

Rates change often. Confirm the rate for each HTS code in the USITC’s Harmonized Tariff Schedule (hts.usitc.gov) before every order, and have a licensed customs broker check classification and origin.

How to keep landed cost current

Landed cost moves whenever a duty rate, supplier price, freight rate, exchange rate or country of origin changes. A routine keeps it current:

  1. Track actuals by purchase order. Replace estimates with the broker’s entry summary and the freight invoices, then compare estimate to actual.
  2. Set review triggers. Rerun the numbers for each new purchase order and whenever CBP announces a rate change for one of the company’s HTS codes.
  3. Reprice from current cost. Start price changes, promotions and channel margins from current landed cost per unit.
  4. Compare sources on landed cost. Rank suppliers after duty and freight are added. I managed contract manufacturers in Vietnam, China and Latin America directly at Medelita; each origin has its own duty rate and freight lane, so each factory needs its own landed cost. The guide to finding a contract manufacturer covers the sourcing side.
  5. Put it in the system. An ERP (enterprise resource planning) system can apply landed cost to each inventory receipt, so cost of goods sold matches what each batch cost.

Landed cost also shapes procurement decisions. At Mars Inc, vendor consolidation and centralized procurement saved $2.5M a year. Tariff exposure, landed cost models and sourcing options are part of supply chain consulting, and the margin side is covered under margin improvement.

Download the landed cost workbook (Excel). Free, no sign-up.

How PILTA helps

PILTA helps owners, founders and executive teams clear bottlenecks and production constraints and unlock commercial expansion, then puts proven strategies in place to grow sales, increase margin and scale operations. On landed cost, senior operators work beside your team to build the model by SKU and country of origin, load the duty, fee and freight lines from real entries and invoices, and set the routine that refreshes it when tariffs, suppliers or freight rates change. The work sits in Supply Chain & Fulfillment and follows the 4D Method: Diagnose, Design, Develop and Deploy.

Frequently asked questions

What does landed cost include?

Landed cost includes the product cost, international freight and insurance, duties and tariffs, CBP fees such as the merchandise processing fee and harbor maintenance fee, customs broker and bond charges, and inbound costs such as port fees, drayage, the truck to the warehouse and 3PL receiving. Inspection, testing, foreign exchange costs and a carrying charge for cash in transit can be added too. It stops once goods are received and ready to sell.

Does landed cost include shipping to customer?

No. Landed cost ends when goods arrive at the warehouse and are ready to sell. Shipping to the customer is a fulfillment cost, along with pick and pack fees, shipping boxes and Amazon fulfillment fees. Track it by channel, because a direct-to-consumer parcel and a wholesale pallet have very different outbound costs. The selling price minus landed cost and fulfillment cost gives contribution margin, which shows what each channel earns.

How do you calculate the landed cost when importing from China?

Use the same formula with China’s duty stack. As of November 16, 2026, a product of China can owe the general HTS rate, a Section 301 duty of 25 or 7.5 percent if its code is on one of the earlier China Section 301 lists, and the 12.5 percent Section 301 duty added on July 24, 2026. Figure duty on the customs value, including any required additions to the price paid, add CBP fees, freight and inbound costs, and have a customs broker confirm the codes.

How do tariffs affect small businesses?

Tariffs raise landed cost, and the importer either absorbs the increase or passes it on in price. The USITC found that U.S. importers bore nearly the full cost of the 2018 to 2021 Section 232 and 301 tariffs. Small orders also feel fixed costs more: the merchandise processing fee has a $34.58 minimum per formal entry, and a CBP rule in effect since June 24, 2026 keeps the de minimis exemption suspended for most parcels of $800 or less.

How do you keep landed cost/margin current after tariffs or FX shifts?

Recalculate landed cost for every purchase order and whenever a duty rate, freight rate or exchange rate moves. Keep the HTS code, origin and duty rates on file by SKU, check them against the Harmonized Tariff Schedule before each order, and replace estimates with actuals from the broker’s entry summary and freight invoices. Then refresh margin by SKU and channel, and adjust prices or promotions where margin falls short of target.

How to calculate landed cost for multiple items?

Calculate duty separately for each item using its HTS code and customs value, then allocate shared costs by a consistent rule. Use volume for ocean freight, weight for air freight and value for insurance and percentage-based customs fees. Divide each item’s allocated total by its units received. PILTA’s team builds landed cost models by SKU and country of origin.

Sources

Thoughtful experts, building with you, when you need it. Book a free 15-minute call with PILTA, or reach the team at ContactUS@pilta.com.

See if PILTA can help. Get on a call with the PILTA Founder and CEO Ryan or one of our expert executives and strategists. No cost, no obligation, just 15 minutes of your time.

Free assessment

See if PILTA can help.

Get on a call with the PILTA Founder and CEO Ryan or one of our expert executives and strategists. No cost, no obligation, just 15 minutes of your time.

About the author

Ryan Sabia, Founder and CEO of PILTA

Ryan has spent 22+ years from Fortune 500’s like Mars Inc, Toyota and J.P. Morgan to 7+ founder-CEO startups, with 4 public companies, a NASDAQ IPO and 5 M&A deals. At PILTA he helps owners, founders and executive teams clear bottlenecks and production constraints and unlock commercial expansion. LinkedIn