Home / What we do / Manufacturing & Kitting

Manufacturing & Kitting: manufacturing consulting

We take production from first run to full volume. PILTA is a manufacturing consultant for product companies: contract manufacturer search and factory audits, RFQs (requests for quote), should-cost models that show what a product ought to cost, supply agreements and scale-up, in the US and overseas.

Production line worker assembling electronics into textile goods at a row of sewing stations.

The companies behind the operator

Tivic Health logo
LumeNXT logo
Medelita logo
Aspen Neuroscience logo
Toyota logo
J.P. Morgan logo

What we solve

Where manufacturing and kitting go wrong.

The factory can’t keep up, or quality slips as volume grows. The six problems below come up most often at consumer goods, MedTech, pet, hardware and industrial companies.

No manufacturer, or the wrong one

A poor fit costs months of delay, rework and minimums the business can’t absorb.

We search, audit and qualify contract manufacturers in the US and overseas, and check capacity, quality systems and finances before the first order.

Quotes that can’t be compared

Without a cost model, there is no basis to negotiate the quote.

We write the RFQ, compare quotes line by line, and build should-cost models from materials, labor, overhead and margin.

Cost of goods rising every run

Each point of COGS (cost of goods sold) comes straight out of gross margin.

We overhaul the BOM (bill of materials), renegotiate with suppliers and qualify second sources.

A pilot run that won’t scale

Launch dates slip and retail orders wait while the line is still being tuned.

We set acceptance criteria for the pilot run, then build the capacity plan and production schedule for full volume.

Quality slipping at higher volume

Defects and returns lead to lost accounts, poor reviews and rework.

We add supplier scorecards, inspection points and SOPs (standard operating procedures) with the factory and the company’s quality lead.

Kits packed by hand

Hand assembly slows shipping and adds errors as orders grow.

We set up kitting and packaging lines in-house, at a co-packer or at the 3PL (third-party logistics provider).

Scale-up

How production gets from first run to full volume.

PILTA runs each step with the factory and the company’s team, and each step has an owner, a date and an exit test.

  • Search and audit: a shortlist of contract manufacturers, site audits and reference checks
  • RFQ and should-cost: one quote template for every factory, checked against a bottom-up cost model
  • Agreement: price, minimums, lead times, quality terms, tooling ownership and exit terms in a manufacturing and supply agreement
  • Pilot run: production tooling and materials, first article inspection (checking the first production units against the specifications) and a go or no-go review
  • Scale-up: a capacity plan, a production schedule, supplier scorecards and a second source

In practice

Find the production step limiting output.

A production review should follow a product through the factory and record how materials and information move. The team can then see where work waits, where tasks are repeated and where the process falls behind demand. A map of the current process gives production, planning and management a common basis for choosing improvements.

The next step is to compare changes to the work sequence, equipment layout and time spent setting up between runs. The team should record the current position, test the chosen change and measure its effect on output, unfinished stock and delivery time. That evidence gives the capacity plan a basis in how the line actually runs.

In practice

Keep production improvements in daily use.

The production team needs a documented work sequence and training in the agreed method. The instructions should describe the tasks, the checks and the action to take when the process cannot run as planned. A process owner should keep them current as materials, equipment or the product change.

A regular production review should compare actual performance with the plan and record the actions needed. Each action needs an owner and a completion date. The next review should check whether the change worked and whether the team needs further training. This gives the company a routine for maintaining improvements after the pilot run and the initial increase in volume.

In their words

“It was pleasure to work closely with Ryan at Aspen Neuroscience. Ryan demonstrated a strong operational discipline, attention to detail, and a clear understanding of how supply chain execution directly impacts manufacturing, research, and overall business continuity in a regulated biotech environment. Ryan’s ability to meet the organization and individuals where they were and help us set a tailored path to better operational excellence was highly valued and appreciated.”

Steve H.
Information Technology Executive · Aspen Neuroscience

What we help with

Manufacturing and kitting work we take on.

PILTA’s contract manufacturing consultants work from the first RFQ to full production, on-site and remotely, as a defined project or with a fractional executive running operations.

  • Contract manufacturer search, vetting and audits, in the US and overseas
  • RFQs, quote comparison and should-cost models
  • Manufacturing and supply agreements
  • Make vs. buy analysis
  • Pilot run to production scale-up
  • Capacity plan and production schedule
  • BOM, supplier and cost-of-goods overhaul
  • Kitting and packaging lines
  • Supplier scorecards and second sources
  • Quality system support alongside your quality lead
  • First article inspection and factory audits
  • Co-packer search and onboarding
  • Product development handoff to production

Industries: MedTech and medical devices, Consumer products, CPG and apparel, EdTech and consumer tech, Industrial and manufacturing

Read next: How to find a contract manufacturer; How to improve gross margin; How to calculate landed cost

Done before

Manufacturing work PILTA’s team has led.

Tivic Health’s FDA-cleared device needed a lower cost to build, with gross margin set as the 2022 focus. PILTA’s team rebuilt the bills of materials and SOPs with quality and engineering, renegotiated with the assembly and circuit-board suppliers, and qualified both through first article inspection. Cost of goods fell 60 percent, circuit-board cost fell 70 percent while capacity grew 25 times, and FDA audits found zero non-conformances. At Medelita, the team ran contract manufacturers in Vietnam, China and Latin America directly, without agents.

How engagements run

Three ways to bring PILTA in.

Bring us in for a defined project, a fractional executive or an embedded team, from pre-revenue to $200M+, and add experts as the company grows.

01

Project

Defined scope, a flat fee, and a clear finish line, delivered by a senior operator.

02

Fractional executive

A COO, CFO, CMO, and when the moment calls for it, the CEO seat itself.

03

Embedded team

Experienced operators working in your team, as your team.

Every engagement follows The 4D Method™: Diagnose, Design, Develop, Deploy.

An aircraft lies broken in the grass, patched with gold tape and smoking, while three people from the company push and prop it up; someone from PILTA stands to one side writing on a clipboard.

Diagnose

Findings and a prioritized plan.

A drawing board shows the old aircraft sketched above the improved design, with measurements marked against it; someone from the company holds a rolled plan while someone from PILTA points to the new design.

Design

A plan your team reviews, changes and signs off.

The aircraft stands on blocks in a workshop; one person from the company tightens the propeller with a wrench, another holds a panel up to the tail, and someone from PILTA directs the work with a clipboard.

Develop

Working systems and a trained team.

The aircraft climbs over a city skyline on a gold ribbon, with bunting and confetti in the sky, while the company team and people from PILTA jump and cheer below.

Deploy

Your team running the systems, with PILTA alongside.

How we work

Straight answers

Questions about manufacturing and sourcing.

What does a manufacturing consultant do?

A manufacturing consultant helps a company make its product at the right cost, quality and volume. The work covers finding and auditing factories, writing RFQs, building should-cost models, negotiating supply agreements, running pilot builds and planning capacity. PILTA’s team does this work hands-on with the factory and the company’s own team, from the first run to full production.

What does co-packer mean?

Co-packer is short for contract packer: a company that makes or packages a product under another company’s brand, to that brand’s formula or specifications. Food, beverage, supplement and personal care brands use co-packers to reach volume without building a plant. The brand usually owns the recipe and the label; the co-packer supplies the line, the staff and often the packaging. PILTA’s team finds and audits co-packers and settles minimums, pricing and quality terms before the first run.

How to select a contract manufacturer?

Shortlist factories that already make similar products at similar volumes, with the certifications the category requires. Audit each site, call two or three of its customers, and send every candidate the same RFQ so the quotes compare line by line. Run a paid pilot before committing volume. PILTA’s team runs the search and audits in the US and overseas, and has managed contract manufacturers in Vietnam, China and Latin America directly.

What is should cost analysis?

Should-cost analysis estimates what a part or product ought to cost, built bottom-up from materials, labor, overhead, freight and a fair margin, instead of starting from the supplier’s quote. U.S. federal acquisition rules describe should-cost reviews as cost analysis that does not assume a contractor’s historical costs reflect efficient operation. Buyers use the model to find the gaps in a quote and negotiate them. PILTA builds should-cost models for RFQs and supplier renegotiations.

What should be included in an RFQ?

An RFQ should include drawings or specifications, the bill of materials, annual volumes and order sizes, packaging and labeling, quality and testing requirements, target dates, shipping terms and payment terms. Ask every supplier to quote in the same format, with material, labor, overhead, tooling, minimums and lead times broken out. PILTA writes the RFQ and checks each quote against a should-cost model.

What is a pilot production run?

A pilot production run is a small build on the production line, using production tooling, materials and operators, before full volume. It proves the process, yield, cycle time, packaging and inspection steps, and it finds problems while they are still cheap to fix. Units often go to testing or early customers. PILTA plans the pilot with the factory: quantities, acceptance criteria, first article inspection and the go or no-go decision for scale-up.

Free assessment

See if PILTA can help.

Get on a call with the PILTA Founder and CEO Ryan or one of our expert executives and strategists. No cost, no obligation, just 15 minutes of your time.

This field is for validation purposes and should be left unchanged.
Name(Required)
What's on your 2027 list?
Pick any.